BLUGUARD SmartBus P900-S32 Series User Manual Download Page 21

Page: 21 / 50

V1.0

SmartBus P900-S32 Series USER MANUAL

3. The screen will show Trouble Messages and keypad audible indicator will sound 2 beeps.

4. The trouble occurred will be displayed. Press the [▼] key to check on all the troubles that

need to be serviced.

5. Press

[#]

key to exit and keypad audible indicator will sound 2 beeps.

6. Possible trouble conditions:



AC Loss



Real Time Clock Loss (Please refer to

Program System Timer

at page 35

(Section 25.6))



Siren Fail



Battery Low Voltage



Telephone Line/GSM CMS Reporting Fail



Telephone Line/GSM Personal Reporting Fail



Telephone Line Connection Fail

Remark: CMS Reporting Fail and Personal Reporting Fail troubles will be extinguished when they are viewed

once.

[8]

(Press and hold down for 2 seconds)

1. The event viewer will store up to 20 latest events in the system. An alarm condition will

cause the

icon flash.

2. The

icon will extinguish once the user enters

EVENT VIEWER

mode.

3. To view, press and hold down key

[8]

for 2 seconds.

4. The viewer will displayed:



Date & Time



Event Occurred

Press [▼] to view the 2

latest event and continue to press [▼] for next event.

6. Press

[#]

to exit event viewer and keypad audible indicator will sound 2 beeps.

16.0 EVENT VIEWER

Summary of Contents for SmartBus P900-S32 Series



















































Search results

Summary of Contents for SmartBus P900-S32 Series

Reviews:

Related manuals for SmartBus P900-S32 Series

Brands by name

Popular brands

BLUGUARD SmartBus P900-S32 Series, User Manual

Search results

Summary of Contents for SmartBus P900-S32 Series

Reviews:

Related manuals for SmartBus P900-S32 Series

Brands by name

Popular brands