13
V1.0
SmartBus P900-S32 Series USER MANUAL
There are various options for arming the system
a.
Partition Arming
b.
Away Arming
c.
Day Arming
d.
Night Arming
e.
Force Arming
f.
Holiday Arming
g.
Remote Control Arming
h.
Timer Auto Arming
i.
Telephone Remote Arming
For information on how to ARM Partition system, please refer to
Partitioning The System
at
page 25 (Section 21.0).
[
] + [USER CODE] + [#]
(Leave via ENTRY/EXIT Zone)
1. Ensure that all zone indicators are extinguished; if not, check that all protected premises
are closed.
2. Press
[
]
key to cancel any unintended entries.
3. Enter a valid 4-digit
[USER CODE]
. If you enter any mistakes, press
[
]
key and re-enter
the code followed by
[#]
key to confirm you command.
4.
will be displayed.
5. An
EXIT
delay countdown timer will be shown at the top right temporarily replace the
clock and the keypad audible indicator will sound on and off for the duration of the
EXIT
delay.
6. Any bypassed zones will be shown by the flashing zone underline.
7. Leave the premises only via the
EXIT/ENTRY
zone.
8. User will be given an
ENTRY
delay time to disarm the system when enter the protected
premises via
ENTRY/EXIT
zone.
9. It is also possible to AWAY arm by simply press and hold down key
[1]
for 2 seconds.
[1]
(Press and hold down for 2 seconds)
10.0 ARMING THE SYSTEM
10.1 AWAY ARMING
