17
V1.0
SmartBus P900-S32 Series USER MANUAL
1. Your system can be remotely ARM from outside the house through any normal DTMF
telephone or GSM hand phone.
2. This arming mode will automatically turn to
FORCE ARM
mode when the user enter a
correct Master Code through Telephone or hand phone.
3. Please refer to
Telephony Control Diagram
at page 7 (Section 6.0).
There are various options for disarming the system:
a. Partition Disarming
b. Keypad Disarming
c. Remote Control Disarming
d. Timer Auto Disarming
e. Telephone Remote Disarm
For information on how to DISARM Partition system, please refer to
Partition Disarming
at page
30 (Section 23.0).
[USER CODE] + [#]
1. To disarm the system, enter a valid 4-digit
[USER CODE]
followed by
[#]
key before
expiry of the entry delay time.
2. Enter the premises through a designated
ENTRY/EXIT
zone; entering via other zones will
trigger an alarm instantly.
3. The
ENTRY
delay begins once the
ENTRY
zone is violated.
4. The keypad audible indicator will sound for the duration of the
ENTRY
delay to indicate
that a valid user code is required.
5. If the
icon remains displayed, an error has been made while entering the user code.
Press
[
]
key and re-enter the user code.
6. An
ENTRY
delay countdown timer will be shown at the top right temporarily replace the
clock.
7. Once the system is disarmed, the
icon will extinguish and the keypad audible
indicator will stop.
10.8 TELEPHONE REMOTE ARMING
11.0 DISARMING THE SY
S
TEM
11.1 KEYPAD DISARMING
