Bluewater Pro 400BC-HR, Owner'S Manual

Page: 11 / 184

11
© Bluewater Group 2022
EN
MAINTENANCE
Daily maintenance
Check indicator lights
Step Action
1 Check that only the ON/OFF light is on, and no other lights are on or flashing, while Pro is
in Standby mode. If any other lights are on or flashing, see “Troubleshooting” section.
Clean the water purifier
Do not use chemicals to clean the surface. Alcohol, petrol,
organic and inorganic acids, strong basic chemicals (such as
concentrated dishwashing detergent) will cause damage to
the surface.
Do not use hard, sharp, or abrasive tools to clean the water purifier.
Step Action
1 Clean the outer surface with a soft moist cloth and a weak soap solution to remove dust,
stains, and dirt.
2 Dry with a soft dry cloth.
Regular maintenance
Regular maintenance is important for correct function and
long term operation. We recommend only Bluewater approved
service personnel perform maintenance and repairs.
For instructions on how to do maintenance, see Complete User manual
on www.bluewatergroup.com.
Frequency Action
1 month Check connections.
Wipe off condensation from the base plate.
4-6 months* Replace the filters every 4-6 months, or as indicated by the FILTER I and
FILTER II LED indicator lights.
6 months* Descale.
1 year Test the purified water every year. If the purified water is not clean, do not
drink it. Contact a Bluewater dealer.
4-6 years* Replace reverse osmosis membrane. Contact your Bluewater dealer.
*Frequency depending on inlet water quality and usage.