Bluewater Pro 400BC-HR, Owner'S Manual

Page: 10 / 184

10
Pro Owner's manual
Water production
Be aware! Do not use or drink the water before “PURIFICATION
LEVEL II or LEVEL III” light turns green. It can take up to 60
seconds before the water purifier indicates good water quality.
For models suitable for commercial use, the faucet could be replaced by, for example,
a valve or a tank.
Figure 5. Water production on/off
Automatic flush
The length of the flush process varies between 5 to 120 seconds, depending on how
much purified water has been produced.
An automatic flush will be performed if one of the conditions below is met:
12 h 15 min
2 min
1 2 3
Figure 6. Automatic flush
Pos Description
1 Automatic flush takes place after every use.
2 Automatic flush takes place after 15 minutes of total operation time. Purified water is not
available during the 2 minute flush.
3 Automatic maintenance flushes take place every 12 hours when Pro is connected to water
and power, and is in Standby mode.