06
LED SILICONE NEON FLEX
ZNSR4-10
M
1
2
2
4
Installation
1.Tools
Cutter
LED power supply
Electric batch
Brush
2.Installation steps
Details of installation operation at input end
Details of installation operation at the end part
Weld the wire to the PCB
board.
First put some glue inside of
the plug, then push into the
tape light
Wipe off the excess glue and
wait for the glue to solidify.
First put waterproof glue
inside of the plug, then push
into the tape light.
Wipe off the excess glue and
wait for the glue to solidify.