If it is still not working after the inspection by yourself, please immediately contact
our service points, do not apart the unit by yourself or our company is out of
responsibility.
DO NOT TRY TO ADJUST OR REPAIR THIS APPLIANCE BY YOURSELF.
Operating noises:
Depending on the material and the processing of the base, the following noises
may occur when using induction cooking zones. These noises are not a fault in the
appliance and do not affect operation in any way.
Cracking noise
1
When using cookware made of different materials (Sandwich construction)
Whistling
1
When using an individual cooking zone or several cooking zones with high power
When the cookware is made of different materials (Sandwich construction)
Humming
2
Occur at high power levels
Clicking
2
During electric switching processes
Hissing, buzzing
3
The device is fit with a fan for cooling the electrics. A whiring noise can be heard
when operating the fan which may deviate depending on the performance and
may continue for a while after the appliance is switched off.
The noise described are normal and do not refer to any defects.
Display show E6.
Short circuit.
Contact the nearest ser-
vice station
Display show E7, E8.
The voltage of the electric
source is too low or too high.
Check the power supply
Display show, E9.
The heat sink temperature
of the damaged IGBT (open
circuit or embolism).
Replace the power board.
ENGLISH
ENGLISH
26
27
Summary of Contents for ICB-6818
Page 31: ...ENGLISH 31 ...
Page 32: ......
