S D S 2 0 0 P I P E D R A I N C L E A N E R
10
o
With gloved hand, pull the cable out or hold cable against the edge of the sewer inlet pipe until a
half circle is formed in the cable.
§
This essentially threads the cable out of the pipe.
o
Release clutch.
o
Push excess cable back through the machine from front to back.
§
Remember to turn off machine and disconnect sections as they come out.
§
When a section of cable is removed, insert the cable back into the cable carrier. Make
sure to reconnect the sections of cable to the last section of cable in the carrier.
o
Repeat this operation until cable is fully out.
o
Turn off machine. Disconnect Power. Remove safety hose.
o
After using this machine, clean and flush cables, couplings and cutters with water.
