Page
4
of
25
The Blueprint Laboratory Confidential Proprietary Information not to be reproduced or made available to third parties without prior
consent from The Blueprint Laboratory and not to be used in any unauthorised way. © The Blueprint Laboratory Pty Ltd 2021
STEP 4
STEP 5
Plug the USB end into the computer.
Turn on the power at the wall socket. The red LED on the
breakout board will illuminate.
This completes the mechanical setup procedure.
1.1.2 REACH CONTROL
Reach Control will be provided to you digitally via email as well as on a USB within the Hard Carry Case.
1)
Install Reach Control.
2)
Open Reach Control > Settings (Cog Icon) > Ports > Add.
Click the new Port. Name your device. Select the Com Port (eg. COM48) that the arm is
communicating on.
