PALM GARDEN ENTERPRISES CORP.
Copyright © 2005. All rights reserved
7
Switching Between Music and Phone Calls
1.Setting Up / Prerequisite
Please confirm the receiver has been added to a list of “Paired Device” in the
Bluetooth enabled cell phone. Set the Bluetooth TX/HCI dongle to TX mode.
*Note:
If you haven’t paired the receiver with the Bluetooth enabled cell phone
before, you need to refer to the section “Responding to Cell Phone”.
2. Making the Switch
(1) Repeat the procedure ”Enjoying the Superior Music Quality” and play
music.
(2) Use the cell phone and find the receiver on the “Paired Device” list. Then,
operate the cell phone to connect to the receiver.
(3) When the connection is set up, the music will pause and you can switch to
the cell phone mode automatically. You can start to make an outgoing call
and are able to converse over the phone.
(4) When your conversation is done and you stop using the cell phone, the
streaming of music will resume immediately and automatically.
(5) If someone calls you, the music will pause and you can answer the
phone.
(6) After the phone call ends, the music will resume again.
(7) You can repeat this scenario and switch freely between cell phone and
music mode.
3.Turning Off
If you don’t want to use the receiver, turn it off by the power switch. If you
don’t want to use TX dongle, turn it off too.
