PALM GARDEN ENTERPRISES CORP.
Copyright © 2005. All rights reserved
6
2. Some cell phones send the ring indication to the receiver while others do
not. If your cell phone supports this feature, you should hear the ring tone
of your cell phone on the receiver. Phones that do not support ring
indication will automatically accept the call.
4.Re-connecting
When the receiver loses connection to Bluetooth enabled cell phone, you
need to repeat step 3 to re-connect it.
5.Turning Off
Turn off the receiver by setting the power switch to “off”.
Enjoying the Superior Music Quality
Before using the receiver to listen to music, you should make a music
connection as follows:
1. Setting Up Music Source
Set the Bluetooth TX/HCI dongle to TX mode. Then link it to the audio source.
The status LED indicator on TX/HCI dongle will flash quickly and search for
the receiver.
2.Connecting the Receiver with TX / HCI dongle
(1) Turn on the receiver. Meanwhile, you can hear the opening sound from
the receiver.
(2) Pair your receiver with TX dongle. The receiver can be automatically
paired.
(3) When the pairing is done, the status LED indicator on the receiver will
start flashing.
(4) The status LED indicator on the TX dongle will flash slowly.
(5) Play music. You can hear music from the receiver.
*Note:
1. It may take you a few seconds in paring receiver with the TX/HCI
dongle for the first time. It will be quicker in searching after that.
2.
If you turn on TX dongle but it cannot find any device to pair with after
3 minutes, it will turn off automatically to save power.
