PALM GARDEN ENTERPRISES CORP.
Copyright © 2005. All rights reserved
4
How to Use
BluePacket Receiver performs well with the Bluetooth TX Dongle and can be
used to demonstrate the following usage scenarios:
z
Responding to cell phone
Pick up / drop calls made to the receiver from Bluetooth enabled cell
phones. Unlike the mono headsets, the Bluetooth receiver can transfer
ring/voice to both your ears with two channels. In this scenario, the ability
of the receiver to stream music is not utilized.
z
Enjoying the superior music quality
Connect the Bluetooth TX Dongle with an audio source and play music.
Let the music be streamed to the Bluetooth receiver. Users can also use
another Bluetooth enabled device that minimally supports the A2DP
profile of the Bluetooth specification, version 1.1 to play music. In this
scenario the ability of the Bluetooth receiver to pick up / drop phone calls
is not utilized.
z
Switching between music and phone calls
The Bluetooth receiver can switch between listening to music and
answering calls made to your Bluetooth enabled cell phone. In this
scenario, the complete functionalities of the Bluetooth receiver are
demonstrated.
Before You Use
z
Bluetooth Receiver
Please make sure the battery power of the receiver is sufficient. If the power
is low, the charging LED indicator of the receiver will start to flash.
Please charge the receiver when you see the low power signal. When you
are charging the battery, the charging LED indicator will constantly on. When
the battery is full, the charging light of the receiver will shut off automatically.
