PALM GARDEN ENTERPRISES CORP.
Copyright © 2005. All rights reserved
9
FAQ
1. Q : How do I know that the battery of the receiver have insufficient power?
A : The battery power is almost exhausted when one or more following
scenarios happen:
(1) The receiver starts to reset automatically.
(2) You can constantly hear breaks on the audio link, or
(3) You cannot connect the receiver to the TX dongle after several tries.
Please charge the battery to avoid these problems above.
2. Q : Why cannot I create a connection to the receiver?
A :
(1) Verify that the battery power of receiver is not running low.
(2) Check if the receiver is powered on and the LED indicator is steadily light
on.
(3) Verify that the receiver is within the specified range of 10 meters from the
audio source.
(4) Check if any other Bluetooth device has connected to the receiver. If the
receiver is connected with other devices, the status LED indicator on the
receiver is flashing.
(5) Turn both the receiver and the TX dongle device off. Power on the
receiver and then power on the TX dongle and try connecting again.
3. Q : Why do I hear beep from the receiver?
A: The beep means the receiver is in the low power status. The receiver will
beep every 20 seconds to remind you to charge it. Meanwhile, the charging
LED indicator is flashing.
Technical Support
If you have further questions, please contact our Technical Support Department.
Thank you!
