BS-6000
Turn on the BS-6000 by attaching a power source. Place the BP-2012S/BP-2012F guard tour
reader in its indentation. The reading head of the BP-2012S/BP-2012F should be between the
status lights of the BS-6000, and its top should be flush against the inside edge of the BS-6000.
The data upload process will be automatically started. All of the data will be uploaded into the
station.
Miscellaneous
After communicating with the PC, the BP-2012S/BP-2012F will become capable of reading signal
cards after 5 seconds.
The interval between signal card readings should be longer than 5 seconds.
Working As Card Reader
The BP-2012S/BP-2012F guard tour reader can be used as a standard signal card reader used for
various applications.
Troubleshooting
After reading a card, 1 beep with 4 flashings, followed by 4 beeps with 4 flashes
The reading was successful, but the reader’s internal clock should be calibrated with the PC before
further readings are made.
After reading a card, 4 beeps with 4 flashes
The reading was not successful. The reader memory is full. The data needs to be uploaded before
more readings can be made.
After reading a card, 1 beep with 4 flashes, followed by 8 beeps with 8 flashes
There is an error within the reader. It needs to be connected with the computer have its data
uploaded then initialized.
IMPORTANT
: initialization function will remove all of the records saved in the reader.
7
