BlueCard BP-2012F Usage Manual Download Page 6

Page: 6 / 17

BS-3010/BS-3010M

Turn on the BS-3010 by turning on the power switch or attaching a power source. Place the

BP-2012S/BP-2012F guard tour reader in its indentation. The reading head of the

BP-2012S/BP-2012F should be between the status lights of the BS-3010, and its top should be

flush against the inside edge of the BS-3010. The data upload process will be automatically started.

All of the data will be uploaded into the station.

BS-3300

Turn on the BS-3300 by attaching a power source. Place the BP-2012S/BP-2012F guard tour

reader in its indentation. The reading head of the BP-2012S/BP-2012F should be between the

status lights of the BS-3300, and its top should be flush against the inside edge of the BS-3300.

The data upload process will be automatically started. All of the data will be uploaded into the

station.

BS-4000/BS-4000M

Turn on the BS-4000 by attaching a power source. Place the BP-2012S/BP-2012F guard tour

reader in its indentation. The reading head of the BP-2012S/BP-2012F should be between the

status lights of the BS-4000, and its top should be flush against the inside edge of the BS-4000.

The data upload process will be automatically started. All of the data will be uploaded into the

station.

Summary of Contents for BP-2012F

















