Blue-White FLEXFLO M3 Series, Operating Manual, Page: 45 / 60

®
FLEXFLO M3
Page 45 ®
FLEXFLO M3
12.0 Settings 12.0 Settings
Page 44
To Input a Passcode:
1
Open the App Drawer
2
Open Settings
3
Open Passcode
4
Enable Passcode
5
Select User Passcode and
create new a six digit code.
6
Confirm by pressing Save
12.8 Passcode
This setting is used to enable/disable the passcode, adjust the passcode time out and set or
change the User Passcode.
Default settings: Pump will lockout after 30 seconds
Lost password? Email to have your password reset customerservice@blue-white.com
To Conduct A Factory Reset:
1
Open the App Drawer
2
Open Settings
3
Open System
4
Select Reset to Factory
Defaults
5
Confirm by pressing Continue
6
Pump will Reboot and run
through the initial setup process
12.9 Factory Reset
This setting is used to factory reset the pump. This will erase all of the configurations and
restore the pump to it’s original configuration when it left Blue-White factory.