TABLE OF CONTENTS
1
.....Introduction .....................................................................................
3
2
.....Specifications............. .............. .............. .............. .............. ..............
3
3
.....Features........ .............. .............. .............. .............. .............. ..............
3
4
.....Unpacking.... .............. .............. .............. .............. .............. ..............
3
5
.....Installation ... .............. .............. .............. .............. .............. ..............
4
5.1
..Mounting location ............. .............. .............. .............. ..............
4
5.2
..Input power connections ... .............. .............. .............. ..............
5
5.3
..External input signal connections.... .............. .............. ..............
6
5.4
..How to install the tubing and fittings............. .............. ..............
8
6
.....How to operate the Pump ......... .............. .............. .............. ..............
9
6.1
..How to adjust the output - manual stroke adjustment ................
9
6.2
..Electronic pump output controls ..... .............. .............. ..............
10
6.3
..Mode 0 - FVS System set-up........... .............. .............. ..............
10
6.4
..Mode 1 - Manually Adjusting the output....... .............. ..............
13
6.5
..Mode 2 - 4-20 mA input.... .............. .............. .............. ..............
14
6.6
..Mode 3 - 0-10 VDC input . .............. .............. .............. ..............
16
6.7
..Mode 4 - Frequency (Hz) input ....... .............. .............. ..............
19
6.8
..Mode 5 - Pulse input (Batch)........... .............. .............. ..............
20
6.9
..Measuring the pump output - Volumetric test .............. ..............
21
7
.....How to maintain the Pump....... .............. .............. .............. ..............
22
7.1
..Routine inspection and cleaning...... .............. .............. ..............
22
7.2
..How to clean the pump ..... .............. .............. .............. ..............
22
7.3
..500 hour service warning timer ....... .............. .............. ..............
22
Pump head and Valve exploded view drawing ..... .............. ..............
23
Replacement parts drawing ...... .............. .............. .............. ..............
24
Replacement parts list .............. .............. .............. .............. ..............
25
Warranty information. .............. .............. .............. .............. ..............
26
Authorized service centers ....... .............. .............. .............. ..............
27
Page 2
2.0
Specifications
Maximum Working Pressure
150 psig / 10.4 bar (most models)
o
o
Maximum Fluid Temperature
130 F / 54 C
o
o
Ambient Temperature Range
14 to 110 F / -10 to 43 C
Duty Cycle
Continuous
Maximum Viscosity
1,000 Centipoise
Maximum Suction Lift
up to 20 ft. water
Power Requirements
115V/60Hz 14 & 30 RPM (1.37A max.)
115V/60Hz 45, 60, 125, 250 RPM (1.87A max.)
230V/60Hz 14 & 30 RPM (0.64A max.)
230V/60Hz 45, 60, 125, 250 RPM (0.74A max.)
220V/50Hz 14 & 30 RPM (0.68A max.)
220V/50Hz 45, 60, 125, 250 RPM (1.14A max.)
240V/50Hz 14 & 30 RPM (0.66A max.)
240V/50Hz 45, 60, 125, 250 RPM (1.04A max.)
Dimensions
6-1/4” H x 10-1/8” W x 9” D
Weight
8 lb. / 3.6 Kg
Page 3
1.0 Introduction
Congratulations on purchasing the C-1100 Model-E positive displacement
metering pump. The C-1100 is designed to inject chemicals into piping
systems and is capable of injecting against a high system pressure up to 150
PSI (10.4 bar). In addition to the front mounted mechanical flow rate
adjustment, the C-1100 Model-E unit is equipped with an external input
control circuitry which allows the pumps output to be externally controlled
by either a 4-20mA input signal, a 0-10V DC input signal or a pulsed input
signal.
C-1100E
C-1100E
4.0 Unpacking
Your pump package should contain the following:
1 - Injector pump
1 - suction tube footvalve & strainer assembly
1 - ceramic tubing weight
1 - 5’ Length of clear PVC suction tubing
1 - 5’ Length of opaque LLDPE discharge tubing
1 - Injection fitting with internal back-flow check valve
1 - Mounting hardware kit
3.0 Features
!
Double-ball, springless ceramic check valves with PVDF (Kynar) body,
TFE/P (Aflas) and Viton o-ring seals.
!
Easy access, front mounted mechanical feed rate adjustment.
!
High outlet pressure capability of 150 psig (most models).
!
4000:1 adjustment turn down ratio.
!
Digital electronic feed rate control.
!
Corrosion proof Valox housing.
!
Tamper resistant electronic control panel cover.
