12
POOL STORAGE & WINTERIZATION
WARNING:
This above ground pool cannot be winterized. If you live in an area where the tempera-
ture drops below 32°F (0°C), your pool must be drained, disassembled, and stored properly. If you
are in a warmer environment, please follow the winterizing instructions below.
After seassonal use, one can easily drain and store their pool in a safe and dry loacation. However, in
warmer climates, some pool owners may choose to leave their pool up all year round. If this applies
to you, see the directions below. If you live in colder areas, where freezing temperatures occur, there
is a high risk of ice damage to your pool. Therefore, leaving your above ground pool set up in areas
where the temperature drops below 32 degrees Fahrenheit (0°C) will void the pool warranty.
How to Winterize Your Pool
1.
Begin by cleaning the pool water thoroughly.
2.
Remove the skimmer (if applicable) or any accessories attached to the threaded strainer connector.
Replace the strainer grid if necessary. Before storage, ensure all parts are clean and dry.
3.
Unplug the inlet and outlet fittings from the inside of the pool (if applicable).
4.
Now, remove the ladder (if applicable) and store in a safe place. Ensure the ladder is dry before
storage.
5.
Remove the hoses that connect the pump and filter to the pool.
6.
Add the appropriate chemicals for the winter period. Consult your local pool dealer as to which
chemicals you should use and how to use them.
NOTE:
These may vary greatly by region.
7.
Cover pool with a Blue Wave Pool Cover.
IMPORTANT:
BLUE WAVE POOL COVER IS NOT A
SAFETY COVER.
8.
Clean and drain the pump, filter housing, and hoses. Remove and discard the old filter cartridge.
Keep a spare cartridge for the next season.
9.
Bring pump and filter parts indoors and store in a safe and dry area, preferably between 0ºC (32ºF)
and 40ºC (104ºF).
