Step 2
•
Push one pivot ball (
C
) onto the round
bottom opening of the ladder.
The
rounded end should face downward.
•
You may need to twist, push and/or hit
the pivot ball into place with a rubber
mallet to get it properly positioned.
•
Repeat for second rail and other pivot
ball.
•
Check to ensure that both pivot balls
are fastened securely as these are what
hold the ladder onto the bottom step.
Step 3
•
Place the bottom step (
B
) on a
hard, level surface with the
recessed areas facing upwards.
•
Hold the ladder assembly over
the bottom step and align the
pivot balls with the round
recessed areas on the bottom
step.
•
Push down
firmly
until both
pivot balls click into place on the step.
•
Standing with the ladder in front of you, push the ladder
forward and pull it back towards you to check that pivot
balls are in place. The ladder should swivel forward and
backward, and the pivot balls should
not
pop out of place.
NOTE:
You may need to use some force to get the pivot balls to
click into place.
