background image

WHAT IS COVERED? 

Prizer-Painter provides the following limited warranties to the original retail purchasers of Products sold 
and installed in the continental United States and Canada on or after February 22, 2002: 
 

Initial Seven (7) Day Limited Warranty.

  

Prizer-Painter warrants that all cosmetic components of its 

products will, under normal use and service, be free from defects in materials and workmanship for a pe-
riod of seven (7) calendar days from the date of delivery (the "Warranty Period") to the original retail pur-
chaser.  For purposes of this Limited Warranty, cosmetic components include top grates, ring grates, plate 
rail, kick panel, body sides, glass, control panel, door panel, back guards, oven seals, light bulbs, and 
enameled parts.  All warranty claims for cosmetic items must be reported immediately within seven calen-
dar days of delivery or such claims will not be honored.  Please refer to your installation checklist to acti-
vate your limited warranty.

 

One (1) Year Limited Warranty.

  

Prizer-Painter warrants that all functional components (except cast 

iron burner tops) of its products will, under normal use and service, be free from defects in materials and 
workmanship for a period of one (1) year from the date of delivery (the "Warranty Period") to the original 
retail purchaser.  For purposes of this Limited Warranty, functional components include all components of 
the product other than the cosmetic components covered by the initial seven day limited warranty and the 
cast iron burner tops covered by the 10 year limited warranty.

  

Please refer to your installation checklist to 

activate your limited warranty.  

Failure to send a complete and accurate copy of the installation check-

list within 15 days of installation will invalidate your limited warranty.

 

Ten (10) Year Limited Warranty.

 

Prizer-Painter warrants that all functional components of its cast iron 

burner tops will, under normal use and service, be free from defects in materials and workmanship for a 
period of ten (10) years from the date of delivery (the "Warranty Period") to the original retail purchaser.  
Please refer to your installation checklist to activate your limited warranty.  

Failure to send a complete 

and accurate copy of the installation checklist within 15 days of installation will invalidate your lim-
ited warranty. 

 

If any Product fails to comply with the foregoing Limited Warranties during the applicable Warranty Pe-
riod, Prizer-Painter will, at its option, either (i) pay the reasonable labor and material costs to have the 
Product repaired by a factory authorized service agent; (ii) replace the Product or defective component of 
the Product; or (iii) if in Prizer-Painter's sole judgment circumstances are such as to preclude the remedy-
ing of any breach of warranty by repair or replacement, then Prizer-Painter will refund the purchase price 
paid by the original purchaser.  All repairs or replacement service must be performed by a factory author-
ized service agent.  Additionally, all Products must be accessible for service in the home and must be ac-
cessible via public highways within 100 miles roundtrip of a factory authorized service agent.  The pur-
chaser will be responsible for the cost of additional mileage, non-standard service and special equipment to 
remove the Product for service so that there is accessibility on all sides of the Product. 
The repair or replacement of the Product or the return of the purchase price will be the purchaser's sole and 
exclusive remedy for any breach of this Limited Warranty or any other claim with respect to the Product, 
including those claims based on contract, warranty, or tort.  In no event will Prizer-Painter's liability for 
any defective Product exceed the purchase price thereof.  This exclusive remedy will not be deemed to 
have failed of its essential purpose so long as Prizer-Painter is willing and able to repair and/or replace de-
fective Products in the manner prescribed herein or to provide a refund if, in Prizer-Painter's sole judgment, 
repair or replacement is not feasible or appropriate under the circumstances. 
 
 

 

WARRANTY 

                                   P/N 750306 Page   31 

Summary of Contents for BS-PL30240





































Reviews: