background image

 

WHAT IS NOT COVERED? 

This Limited Warranty is the sole and exclusive warranty provided for the Product and extends only to 
original retail purchasers in the continental United States and Canada.  This Limited Warranty is not trans-
ferable to any subsequent purchasers or users.  If any implied warranties arise under any applicable law 
(including, but not limited to, implied warranties of merchantability and fitness for particular purpose), 
then the duration of those implied warranties will last only as long as the express warranties stated above.  

Prizer-Painter will not under any circumstances be liable for any special, indirect, incidental or con-
sequential damages of any kind, including but not limited to loss of business or profits, loss of use, or 
installation or removal costs

.  Nor will Prizer-Painter be responsible for any shipping costs related to the 

repair or replacement of any Product under this Limited Warranty.  Some States do not allow the exclusion 
or limitation of incidental or consequential damages or limitations on how long implied warranties last, so 
the above limitations may not apply to you. 
This Limited Warranty does not apply to commercial usage or to any Products installed in any non-
residential settings such as day cares, bed and breakfasts, hotels, nursing homes, churches, etc.  This Lim-
ited Warranty also does not cover, and specifically excludes, chipping porcelain, calibrations and normal 
adjustments after installation and setup, burner adjustments, normal care and maintenance, cleaning of 
parts, shipping damage, discoloration of the griddle, rust, gasket materials, ceramic materials, and fuses.  
Additionally, there is no warranty coverage for any Products that fail or have been damaged due to altera-
tions or modifications; abuse; misuse; neglect; improper installation, instruction, handling, operation, 
maintenance or storage; accidental or intentional damage; normal wear and tear; unauthorized service or 
repairs, including unauthorized adjustments or calibrations performed on the Product; damage from natural 
disasters, fires, floods, earthquakes or other acts of God; loss of electrical power to the Product for any rea-

son; alteration for outdoor use; damage due to the use of harsh chemicals (e.g.

cleaning products improp-

erly applied); or any other circumstances beyond Prizer-Painter's control.  This Limited Warranty is also 
invalid if the original factory installed serial number has been altered or removed from the Product. 
The Purchaser is responsible for proper installation and normal care and maintenance of the Product.  This 
warranty gives you specific legal rights, and you may also have other rights which vary from State to State. 

 
OBTAINING WARRANTY SERVICE

 

All warranty claims must be reported to Prizer-Painter Stove Works, Inc., 600 Arlington St., Reading, 
Pennsylvania 19611 prior to the expiration of the applicable Warranty Period.  If a warranty claim relates 
to cosmetic parts, any such claim must be reported to Prizer-Painter within seven (7) calendar days after 
the Product has been delivered.  The purchaser must call the factory at the toll free 1-800-449-8691 to re-
port a warranty claim or to obtain information about warranty service.  If any warranty claim is not submit-
ted as required by this Limited Warranty, any such claim will be invalid and will not be honored.  At the 
time the warranty claim is made, the purchaser must provide the model number of the Product, the serial 
number of the Product, proof of delivery, a description of the claimed defect, and proof of purchase of the 
Product, including the original retail receipt or invoice to establish the Warranty Period.  Prizer-Painter 
must also be given an opportunity to inspect any defective Product. 
All warranty repairs must be performed by a factory authorized service agent.  Service will be provided 
during normal business hours.  The purchaser will be responsible for any labor performed at overtime or 
premium rates.  The purchaser is also responsible for making the Product accessible for service.  

 

WARRANTY 

P/N 750306  Page   32 

Summary of Contents for BS-PL30240





































Reviews: