background image

We are confident that you will be delighted with your WALDORF GAS GRIDDLE, and it will become a most  

valued appliance in your commercial kitchen. 

To ensure you receive the utmost benefit from your new Waldorf GAS GRIDDLE, there are two  

important things you can do. 

 
Firstly: 

Please read the instruction book carefully and follow the directions given.  The time taken will be well 

spent. 

 

Secondly: 

If you are unsure of any aspect of the installation, instructions or performance of your appliance,  

contact your WALDORF dealer promptly.  In many cases a phone call could answer your question. 

 
CE Only: 

These instructions are only valid if the country code appears on the appliance.  If the code does not  

appear on the appliance, refer to the supplier of this appliance to obtain the technical instructions for 

adapting the appliance to the conditions for use in that country. 

WARNING: 

 

I

MPROPER

 

INSTALLATION

ADJUSTMENT

ALTERATION

SERVICE

 

OR

 

MAINTENANCE

 

CAN

 

CAUSE

 

PROPERTY

  

DAMAGE

INJURY

 

OR

 

DEATH

.  R

EAD

 

THE

 

INSTALLATION

OPERATING

 

AND

 

MAINTENANCE

 

INSTRUCTIONS

  

THOROUGHLY

 

BEFORE

 

INSTALLING

 

OR

 

SERVICING

 

THIS

 

APPLIANCE

WARNING: 

 

INSTRUCTIONS

 

TO

 

BE

 

FOLLOWED

 

IN

 

THE

 

EVENT

 

THE

 

USER

 

SMELLS

 

GAS

 

ARE

 

TO

 

BE

 

POSTED

 

IN

 

A

 

PROMINENT

 

LOCATION

.  

THIS

 

INFORMATION

 

SHALL

 

BE

 

OBTAINED

 

BY

 

CONSULTING

 

THE

 

LOCAL

 

GAS

 

SUPPLIER

WARNING: 

 

G

REAT

 

CARE

 

MUST

 

BE

 

TAKEN

 

BY

 

THE

 

OPERATOR

 

TO

 

USE

 

THE

 

EQUIPMENT

 

SAFELY

 

TO

 

GUARD

 

IT

 

AGAINST

 

RISK

 

OF

 

FIRE

• 

T

HE

 

APPLIANCE

 

MUST

 NOT 

BE

 

LEFT

 

ON

 

UNATTENDED

• 

I

T

 

IS

 

RECOMMENDED

 

THAT

 

A

 

REGULAR

 

INSPECTION

 

IS

 

MADE

 

BY

 

A

 

COMPETENT

 

SERVICEMAN

 

TO

 

ENSURE

 

CORRECT

 

AND

 

SAFE

 

OPERATION

 

OF

 

YOUR

 

APPLIANCE

 

IS

 

MAINTAINED

• 

DO NOT 

STORE

 

OR

 

USE

 

GASOLINE

 

OR

 

OTHER

 

FLAMMABLE

 

VAPOURS

 

OR

 

LIQUIDS

 

IN

 

THE

 

VICINITY

 

OF

 

THIS

 

OR

 

ANY

 

OTHER

 

APPLIANCE

• 

DO

 

NOT

 

SPRAY

 

AEROSOLS

 

IN

 

THE

 

VICINITY

 

OF

 

THIS

 

APPLIANCE

 

WHILE

 

IT

 

IS

 

IN

 

OPERATION

C

AUTION

 

This appliance is; 

• 

For professional use and is to be used by qualified persons only. 

• 

Only qualified service persons are to carry out installation, servicing and 
gas conversion operations.

 

• 

Components having adjustments protected (e.g. paint sealed) by the  
manufacturer should not be adjusted by the user / operator. 

• 

DO NOT operate the appliance without the legs supplied fitted. 

Introduction

 

gpd.sunwayinfo.com.cn

gpd.sunwayinfo.com.cn

gpd.sunwayinfo.com.cn

Summary of Contents for GP8120G































Reviews: