14
Operation
Lighting the Pilot Burner
These griddles are fitted with a pilot as a standard option and flame failure protection, which is
incorporated for each main burner, by way of a thermo-electric system. Flame failure protection will shut
off the gas supply to that burner in the event that the pilot for that burner goes out, so that un-burnt gas is
not expelled.
This is an important safety feature which is slowly becoming law throughout the
world.
1.
Partially depress the gas control knob whilst turning
anti-clockwise to the ‘Pilot’ position. DO NOT
fully depress the Gas Control Knob whilst trying
to rotate anti-clockwise as the Knob and Gas
Valve will be damaged.
2.
With the gas control knob in the ‘Pilot’ position, keep
the knob depressed whilst pressing the piezo igniter
button. (Each press of the piezo igniter button will
generate a single spark).
3.
Hold in the gas control knob depressed for approx.
10-15 seconds, then release. The pilot burner should
remain alight. (If the pilot does not light, repeat
Items 1 to 3 above).
4.
Pilot ignition can be viewed through opening in plastic
surround of piezo igniter button.
NOTE: If the pilot burner goes out during normal
operation wait 5 minutes before re-lighting.
Lighting the Main Burner
1.
Ensure that the pilot burner is alight.
2.
Rotate the gas control knob anti-clockwise to the
desired temperature marked on the knob.
3.
The main burner will now ignite automatically, from
the pilot burner.
Turning 'Off' the Main Burner / Pilot
NOTE: DO NOT attempt to rotate the Gas Control Knob
anti-clockwise back to the ‘O’ Off position as the
Knob and Gas Valve will be damaged.
1.
Rotate the gas control knob clockwise to the ‘Pilot’
position. The main burner will extinguish and the
pilot burner will remain alight.
2.
To turn 'Off' the main burner completely,
partially
depress the gas control knob whilst turning clockwise
to the 'O' Off position, the pilot burner will extinguish.
DO NOT fully depress the Gas Control Knob
whilst trying to rotate clockwise to the ‘O’ Off
position as the Knob and Gas Valve will be
damaged.
WARNING:
S
URFACE
TEMPERATURE
OF
THE
GRIDDLE
PLATE
CAN
REACH
OVER
235°C
WHEN
THE
APPLIANCE
IS
OPERATED
AT
FULL
SETTING
.
Pilot Flame
Viewing Opening
Control Knob in
Pilot Position
Control Knob in Main
Burner Operating Position
Piezo Igniter Button
Control Knob in
Pilot Position
Rotate Anti-Clockwise to Operating Temperature
Depress and Rotate Anti-Clockwise to Pilot Position
Rotate Clockwise to Pilot Position - Then Partially
Depress and Rotate to the ‘O’ Off Position.
gpd.sunwayinfo.com.cn
gpd.sunwayinfo.com.cn
gpd.sunwayinfo.com.cn