-27-
Revision 3/F3601
6.5 ADJUSTMENT
6.5.1 BURNER AERATION
Two
Screws
6.5.2 RE-GREASING HOB GAS CONTROL
1) Remove gas control (refer 6.3.4).
2) Remove two screws securing shaft of gas
control.
Figure 6.5.3
3) Withdraw spindle from gas control barrel,
noting it’s orientation.
The open top, griddle and oven burners can
all be adjusted to give the most efficient flame.
If the flame is yellow and wavy, then the
burner needs adjusting.
1) Loosen the aeration slide screw.
Figure 6.5.1
2) Adjust the aeration slide as required.
The most efficient flame is clear blue/
green in colour.
Aeration slide screw
(Open burners)
Figure 6.5.2
Aeration slide screw
(Oven burner)
6.4.10 DOOR HINGE
1) Open oven door.
2) Undo three screws securing hinge to oven
body, and three screws securing hinge to
door.
Figure 6.4.14
Door
hinge
3) Replace hinge and reassemble in reverse
order.
6.4.11 DOOR BALL CATCH
1) Open right hand oven door.
2) Loosen the door catch locknut.
3) Turn the slot on the ball catch
anticlockwise to unscrew the ball catch.
4) Replace and reassemble.
Figure 6.4.15
Ball
catch
