Blue Sea Systems Battery LINK 7606 User Manual Download Page 12

980032720 Rev.001

For the following equipment:

Product type: Battery Charger 20A

Type designation: BatteryLink Charger: 7606, 7607

Manufacturer: Blue Sea Systems, Inc.

Address: 4600 Ryzex Way

 

Bellingham, WA

 

98226 USA

 

Phone: 001.360.738.8230

Herewith it is confirmed to comply with the requirements set out in the council directive, 2006/95/EC for 

electrical equipment used within certain voltage limits, the EMC directive 2004/108/EC , and the Recre-

ational Craft Directive 2013/53/EU.

Safety:  IEC60335-1:2010+A1+A2

 

IEC60335-2-29:2016

 

EN60335-1:2010+A1

 

EN60335-2-29:2004+A1+A2

EMC: Emission: 

EN 55014-1:2017 

 

Radiated emission

 

Conducted emission

 

EN61000-3-2 Harmonics

 

EN61000-3-3 Voltage fluctuations and flicker

 Immunity: 

EN 55014-2:2015

 

EN61000-4-2 Electrostatic discharge

 

EN61000-4-3 RF electromagnetic field

 

EN61000-4-4 Fast transient

 

EN61000-4-5 Surges

 

EN61000-4-6 RF conducted disturbances

 

EN61000-4-11 Voltage dips and interruptions

Ignition Protection:

 

ISO 8846 (ed. 1)

 

The notified body HPi Verification Services Ltd (NB 1521) performed type examination to verify  

 

compliance with the above ignition protection standard, and issued the certificate 

 

HPiVS/R1168-013-I-01.

The undersigned hereby declare that the equipment specified above conforms to the above directives 

and standards

Bellingham 2019-07-03

Blue Sea Systems, Inc.

........................................................

David Johnson, Senior Vice President of Marine and Mobile

EC DECLARATION OF CONFORMITY

[email protected]

www.bluesea.com

Summary of Contents for Battery LINK 7606













Reviews: