Blue Giant BGN-40, Owner'S Manual

Page: 26 / 126

Table 4-2 Set Options - Continued
Parameter Factory Setting Description
AUX VOLTAGE #1 100% This option specifies the percentage of the keyswitch controlled
voltage to be applied to the loads on CNA#1 ( Table 4-5 ) (main
contactor coil) and CNA#3 ( Table 4-5 ) (electromechanical brake).
The voltage modulation is set with a PWM at 1 kHz frequency.
After an initial delay of about 1 sec in which the entire keyswitch
controlled voltage is applied to the loads, the PWM reduces the
voltage at the loads down to the specified percentage.
PERFORMANCE OPTION #1 This option can be set
• OPTION#1
• OPTION#2
QUICK INV. LOGIC OPTION #1 This option specifies the active level for the Belly switch input
(CNB#7)
• OPTION#1: The quick inversion is executed when CNB#7 ( Table
4-5 ) is closed to a Keyswitch controlled voltage.
• OPTION#2: The quick inversion is executed when CNB#7 ( Table
4-5 ) is opened from a Keyswitch controlled voltage.
MDI-PRC ABSENT This option specifies:
• PRESENT: The MDI-PRC is connected to the ACO via the CAN
Bus: the handling of the Hydraulics is specified on the TRUCK
TYPE setting.
• ABSENT: The MDI-PRC is not connected to the ACO: the TRUCK
TYPE disappears from the SET OPTIONS function list.
MOT SET-UP OFF Not used.
26