AIRBAG DOCK LEVELER WITH CONTROLS—OWNER’S MANUAL
14
ISSUE DATE: FEBRUARY 1, 2016 REV.2 (PART # 038-880E)
8.4 BELOW LEVEL / END LOADING
1. After the truck has been chocked and / or restrained in place,
hold the control station’s ‘UP’ button until the lip clears the
night lock by approximately 6-10".
2. Then release. While the deck is lowering, pull the fall-safe
disengaging chain on the deck to partially extend the lip and to
lower to the below level position, with the lip hanging between
the dock face and the truck bed.
3. When below level / end loading is complete, resume normal
leveler operation by pressing and holding the ‘UP’ button until
the deck is raised and the lip is fully extended.
Release the button and allow the deck to lower onto the truck
bed. If end loading was the last operation, press and hold the
'UP' button until the lip clears the night lock and then release.
The deck will fall back into the stored position.
