background image

Blue Diamond Safety

ABOUT THIS MANUAL 

Read this manual and follow safety instructions before operating the 

grinder

.  Learn to operate the stump grinder and its

 

controls properly.  Never let anyone operate without instruction.  

This manual contains information about the usage 

and maintenance required for the equipment. This document must be available for review by the operator before 
using the attachment to ensure proper safety, maintenance,

 

and usage.

 

TERMINOLOGY & HAZARD NOTICES USED IN THIS MANUAL

 

CAUTION 

WARNING 

DANGER 

Cautions are used to indicate a potentially hazardous situation which, if not avoided, may result 
in damage to the equipment or other property.

 

Warnings are used to indicate a potentially hazardous situation which, if not avoided, could 
result in serious injury or death.

 

Danger is used to indicate a potentially hazardous situation which, if not avoided, will result in 
serious injury or death.

 

Prime Mover 

The 

Blue Diamond Stump 

Grinder can be attached to many different pieces of equipment;

therefore the term “prime mover” will be used.  A prime mover is any loader, tractor or 
equipment providing power to the attachment. 

SAFETY 

Safety Notices

 

Before operating or conducting maintenance on this equipment, it is important to wear proper protection. 
Recommended safety equipment when operating and maintaining this equipment include close fitting 
clothing, earplugs, eye protection, and a hard hat.  Additional safety equipment may be required depending on 
the operating environment and worksite conditions. 

Only qualified and trained personnel should operate,

 

maintain, and service this attachment.  It is recommended that this 

equipment be inspected regularly for leaks, cracks, or other conditions that may impair proper usage of the equipment.  
Verify that all repairs have been completed and inspected prior to using the attachment under load.

 

It is the responsibility of the user to follow all local, state, and federal safety regulations.  Improper use of this 
equipment may result in personal injury, property damage, and/or damage to the equipment. 

AVOID 

WARNING 

high pressure fluids.  Escaping fluid under pressure can penetrate the skin and cause serious 
injury.  Relive pressure BEFORE disconnecting hydraulic lines.  Tighten all connections before 
applying pressure.  IF AN ACCIDENT OCCURS, SEE A DOCTOR IMMEDIATELY.  Any 
fluids injects into the skin must be surgically removed within a few hours or gangrene may 
result. 
Do not operate the 

grinder

 if any of the safety guards are not in place.

 

Modifications to Equipment

 

Any modifications made to this equipment may void any warranty and relieve the manufacturer of liability of 
any resulting injury or damage 

Summary of Contents for PN 104605














Reviews: