background image

Blue Diamond® Attachments

2

Thank you for your decision to purchase a Blue Dia-
mond Mini Pickup Broom. To ensure maximum per-
formance of your equipment, it is mandatory that you 
thoroughly study the Operator’s manual and follow the 
recommendations. Proper operation and maintenance 
are essential to maximize equipment life and prevent 
personal injury.

Operate and maintain this equipment in a safe man-
ner and in accordance with all applicable local, state, 
and federal codes, regulations and /or laws. Follow all 
on-product labeling and instructions.

Make sure that all personnel have read this Operator’s 
Manual and thoroughly understand safe and correct 
operating, installation and maintenance procedures.

Blue Diamond is continually working to improve its 
products. Blue Diamond reserves the right to make any 
improvements or changes as deemed practical and pos-
sible without incurring any responsibility or obligation 
to make any changes or additions to equipment sold 
previously.

Although great care has been taken to ensure the 
accuracy of this publication, Blue Diamond makes no 
warranty or guarantee of any kind, written or expressed, 
implied or otherwise with regard to the information 
contained within this manual. Blue Diamond assumes 
no responsibility for any errors that may appear in this 
manual and shall not be liable under any circumstances 
for incidental, consequential or punitive damages in con-
nection with, or arising from the use of this manual.

Keep this manual available for frequent reference. All 
new operators or owners must review the manual before 
using the equipment and annually thereafter. Contact 
your Blue Diamond Attachments Dealer for assistance, 
information, or additional copies of the manual. Contact 
www.bluediamondattachments.com or call 888-376-
7027 for a complete list of dealers in your area.

Serial Number Location:

Please record attachment information in the space pro-
vided for future reference.

Model Number:

_____________________________

Serial Number: 

_____________________________

Dealer Name:

 ______________________________

Dealer Number:

_____________________________

Date of Purchase:

___________________________

The serial number plate (is located on right side, just 
forward of the attachment mounting plate.

Always use your serial number when requesting infor-
mation or when ordering parts.

NOTE: 

The directions left, right, front and rear, as

mentioned throughout this manual, are as viewed from 
the operator’s position.

Introduction:

 Owner Information

Revision Date: 8.8.2022

Summary of Contents for Mini Pickup Broom

























Reviews: