16
S
torage
•
When your power washing session has been completed.
1. Turn water supply off.
2. Disconnect the garden hose.
3. Pull the trigger on the spray gun for 30 seconds twice to release any remaining water pressure
4. Turn off the power switch located on the front of the power washer. Off (O)
5. Unplug the power washer.
6. Disconnect the high pressure hose from the back of the machine and the bottom of the spray
gun.
7. Remove lance and/or attachment from the spray gun.
Do not allow the power washer to run with no water flowing through it.
•
Place accessories in compartments built into the power washer.
(Fig. 25)
•
Store power washer and accessories in an area that does not reach freezing temperatures.
Do not store near furnace or any sources of heat, it may dry out the pump seals.
•
For easy handling, attach the spray gun to the quick connect fitting on the top cord holder on
the back of the washer.
(Fig. 26)
•
DO NOT store the power washer where it is exposed to freezing temperatures unless
you use Pump Saver.
It is recommended that you use Pump Saver for storing in freezing
temperatures. Freezing will damage the pump unless Pump Saver is added to the power
washer. If not using or if storing your power washer for more than one month, run Pump Saver
through it. See the section on Pump Saver for more information.
•
Pump saver (PW64511) is available online at www.arblueclean.com.
•
Store the power washer
indoors
if not using Pump Saver and you live in a cold climate area to
prevent freeze damage to the pump.
Fig. 26
Attach
Spray
Gun
Fig. 25