10
High Pressure Hose
•
Connect high pressure hose to the outlet filter
(Fig. 3)
. Make sure the connection clicks tightly
in place. Failure to properly connecting the high pressure hose will result in the hose slipping
or popping off immediately upon turning the unit on. Can also cause leaking.
•
Connect the other end of the high pressure hose to the spray gun by inserting the silver metal
tip of the high pressure hose into the fitting under the trigger guard. It will lock into the spray
gun with a “click”
(Fig. 4)
. Confirm the hose is locked into the spray gun by pulling slightly on
the hose. The hose is now securely attached to the spray gun.
•
To release the hose from the spray gun, press the thumb tab on the underside of the spray gun
toward the trigger guard. The hose will slide out from the connection.
Spray Gun
•
To lock the trigger of the spray gun, make sure power is off (O)
(Fig. 5)
aim the spray gun
away from you and push the lock button up,
(Fig. 6)
after doing so, squeeze or pull the trigger
to make sure it is locked and will not move. Get in the habit of leaving the lock button in the
“locked” position when the power washer is not in use. This ensures the gun is in “safe” mode
until it is ready for use.
Trigger Lock
Trigger Unlock
Fig. 5
Fig. 6
Switch OFF
Fig. 3
On
Off
Fig. 4
