12
o
Perating
i
nStrUctionS
• Make sure the “ON/OFF” switch is in the “OFF” position. The power switch has international
symbols for ‘on’ and ‘off’: On ( | )
(Fig. 12)
Off (O)
(Fig. 13)
.
• Unwind the power cord completely and plug the GFCI into a grounded 120 volt outlet. Press
the ‘reset’ button on the GFCI box
(Fig. 14)
. The indicator window should show a red color.
This must be done each time the unit is plugged in.
•
Install the garden hose adapter (GHA) and quick connect filter. First, remove the plastic
shipping cover on the water inlet on the front of the power washer. Attach the clear plastic
adapter by screwing it into the water inlet
(Fig. 15)
.
•
Connect garden hose. Hand tight is fine. Next screw on the blue/black collar attachment to
your garden hose
(Fig. 16)
. Slide the blue/black collar onto the clear adapter, it will “click” into
place. The water is now connected to your power washer.
• Turn on the water supply at the faucet.
• Release the safety lock button on the spray gun by pressing the safety lock button from right to
left. While pointing the spray gun in a safe direction, squeeze the trigger on the spray gun until
there is a steady stream of water, letting the water and air out of the hose.
(Fig. 17)
Switch ON
Fig. 14
Fig. 12
Fig. 13
Switch OFF
Fig. 16
Fig. 17
Garden
Hose
Adapter
Pump
Hose
QC-Clear
Adapter
Fig. 15
