24
8/7/2020
Warning: the polarity of each battery must be observed. Improper handling of batteries may result in heat
generation, explosion or fire, which may lead to personal injuries. Replace only with correct batteries.
Batteries must not be recharged, disassembled or disposed in fire. Disposal of used batteries must be in
accordance with the waste recovery and recycling regulations in your area. Keep away from small
children. If batteries are swallowed, immediately see a doctor.
External power supply rating
AC power input: 100-240V ~60Hz
DC power output: 5V ~2A
4.3.
Blue by ADT Door & Window Sensor
Before you get started you will need:
• Blue by ADT Smart Home Hub
• Blue by ADT app on the latest iOS or Android OS
• Phillips screwdriver or a drill with a Phillips driver bit (optional)
• Power drill with drill bits for pilot holes (optional)
Pairing
The Blue by ADT Smart Home Hub is the controlling hub that your sensors communicate with. To pair
your sensors with the Blue Smart Home Hub, just launch your Blue by ADT app. Once logged in, select
Menu > Devices > (+) Add Device >Sensors > Door & Window Sensor, and follow the in-app setup help
to pair your sensor.
Note: Sensors and devices in a Blue by ADT system are preconfigured so they will be pre-paired to your
system and can be added by simply removing the battery tab, as shown in the following steps.
To enable a new sensor:
1. Pull the exposed plastic battery tab from the back of the Blue by ADT Door & Window Sensor.
2. The LED indicator will begin to flash to indicate that the sensor is booting.
3. The LED will continue to blink once per second while attempting to pair with the Blue by
ADT Smart Home Hub.
4. If a network is not found after 90 seconds, the sensor will go into sleep mode. To wake the
sensor again, you need to use the magnet or press the pairing switch to repeat the pairing process.
Mounting your Blue by ADT Door & Window Sensor
This sensor is intended to be installed in accordance with the Standard for Installation and Classification
of Residential Burglar Alarm Systems, UL 1641.