
19
8/7/2020
Monitoring company
Criticom/Security Monitoring Services, Inc.
PO Box 521769
Longwood, FL 32752
Phone: 855-894-1737
It is crucial to obtain permits and/or registration if required in your municipality.
Please note: Residents are responsible for all permit fees, false alarm fees, runner service/alarm
verification service fees, and other applicable fees if incurred.
Many municipalities will not allow ADT to begin monitoring your home without a permit. In the
event of a false alarm, municipalities can charge fines to consumers who do not obtain the
required permits/registration. Also, some police agencies will not dispatch to a home that is not
registered/permitted.
Note: You may still be required to pay your municipality’s false alarm fees.
Battery
The Blue Smart Home Hub includes an integrated 2400 mAH LiIon battery designed to operate the
device for 24 hours upon loss of AC power. The battery pack model number is S40LRBR0-01. Please
note that the smart home hub is shipped in a deep sleep mode (like a smart phone or tablet), with very
little power draw and a partial charge on the battery. When the smart home hub is first plugged into AC
power, the device will automatically begin normal operations. It may take 24 to 48 hours for the battery to
reach full charge. If the battery ever becomes fully discharged, the battery will again require 24-48 hours
to reach full charge. During normal operation, the smart home hub automatically maintains the charging
of the battery and there is no action required on your part.
The S40LRBR0-01 battery typically has a chemical life of at least 5 years. If this battery requires
replacement, use only Blue by ADT Rechargeable Battery supplied with your Blue Smart Home Hub.
Replacement batteries are also available through Blue by ADT Customer Support at
877-464-7437
or
online at
www.BluebyADT.com/support
.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS. The Blue Smart Home Hub should
not be placed in any location subject to temperatures over 120
F (49°C) or below 32
F (0C) for any
extended period of time. This will degrade the battery life.
Rechargeable Lithium Ion Batteries Must
Be Recycled or Disposed of Properly. Do not mutilate the battery pack. Do not dispose of the battery pack
in a fire due to risk of explosion.
To replace the battery, disconnect the power cord from the smart home hub. Turn the device over so that
the bottom is facing up. Carefully remove the single screw holding the battery door closed. Once screw is
removed, gently lift outside edge of battery door until the battery compartment is exposed. Lift the battery
out of the compartment and disconnect the battery plug from the connector. Reverse the operation to
replace the battery. Please note that that the battery plug is polarized and can only be inserted one way
into the connector. Do not force the battery plug into the connector incorrectly. Gently place the battery
door into position, first making sure that that tabs correctly insert into one edge and then aligning the
screw hole on the other edge. Carefully replace the screw, but do not overtighten (which may damage the
plastic).