PAGE 16
PREP TABLE
9. TROUBLESHOOTING GUIDE
SYMPTOM
POSSIBLE CAUSE
RECOMMENDED ACTION
1. Unit doesn’t run
4
No power to unit
4
Main power switch in OFF
position
4
Plug in unit and check circuit
breaker
4
Remove louver panel, reach inside
compressor compartment and flip
switch to ON position
2. Cabinet not maintaining
temp (base cabinet warmer
than 41°F)
4
Base cabinet overloaded
with warm food product (food
temperature above 41°F)
4
Door gasket not sealing
properly
4
Air filter dirty
4
Condenser coil dirty
4
Inadequate air circulation due
to product loading
4
Circulation fan faulty
4
Remove warm food product and
replace with properly chilled product
(food must be colder than 41°F
before placement into base cabinet)
4
Replace door gasket
4
Clean or replace air filter
4
Clean coil
4
Shift pans/boxes to create
clearance for air circulation
4
Check fan connections and
replace fan if necessary
3. Prep top not maintain-
ing temp (cvbvcvvvvv (liquid
temp) warmer than 35°F)
4
Prep top overloaded with warm
food product (food temperature
above 41°F)
4
Remove warm food product and
replace with properly chilled product
(food must be colder than 41°F
before placement into prep top)
4. Chiller plates are coated
in water and/or ice (thin
layer)
4
Normal operation
4
No action required. Condensation
on the chiller plates will occur
in most kitchen environments.
Occasionally, a thin layer of ice may
develop for a short period of time
5. Chiller plates develop
thick (1/8” or more) layer of
ice
4
Control board set below
standard factory settings
4
Excessive compressor runtime
4
Adjust control board to factory
settings
4
Clean filter and clean condenser
coil if necessary
6. Pans don’t fit in prep top
4
Incorrect pan model
4
Check model specs for a list of
compatible pans
7. Clear water is dripping
from unit
4
Catch pan is overflowing or
missing
4
Clean and replace catch pan in
channel located underneath the prep
table base, ensuring that the pan
reaches the drain lines in the back of
the cabinet.
SERVICE
For additional information, contact Kairak Parts and Service Department: (800) 833-1106.
Summary of Contents for K99597F15
Page 1: ...INSTRUCTION MANUAL KBP PREP TABLE ...
Page 20: ...NOTES ...
