Blow Pro4U 4K, Instruction Manual

Page: 20 / 24

INSTRUCTION MANUAL
20
1. Inserting Micro SD Card
Note: Please choose branded Micro SD card and format it on computer before use. Neutral
cards are not guaranteed to work normally.
2. Installing and removing batteries
A Press on battery cap to open it.
B Correctly install battery into camera as indicated by +/- symbols and direction of
arrows marked on battery until it’s in place.
C Battery Gauge: Please refer to diagram.
D Remove Battery: Open cap to take battery out.
3. Charging
A Charging of camera can be done by either connecting camera to computer or
power adaptor.
B Charge camera on vehicle by connecting it to car charger.
C Camera can record video while charging (Switch into Vehicle-mounted Mode in
“Menu”
）
D Charging of camera can be done even when it’s powered off.
4. Switching camera on and off
A Press and hold power switch for 3 to 5 seconds to turn it on / off.
B Switch it on and off by turning display screen on and off.
5. Mode Switching
Switch between video recording / photo shooting / playback / menu by pressing “Power On-
Off” button.
recording mode, while photo shooting mode. Symbols are displayed on top of
screen. Refers to the function of video playback, and the last one is system settings.
6. How to record videos and configure recording setting
1. Video Recording
Switch to recording mode and there’ll be an icon in the upper left corner of
the screen. Press OK to start recording and the icon in the upper left corner