Blooming NB-1360E, Manual

Page: 10 / 24

AUTO Eco-Mode
Press the "ECO MODE" button on the seat control panel to activate the AUTO mode.
The water temperature and seat temperature are maintained at 86℉(30℃).
Temperature of Heated seat and Water are automatically adjusted to user’s original
settings during the seat is occupied and AUTO Eco-mode starts again once
unoccupied.
SMART Eco-Mode
Press the "ECO MODE" button on the seat control panel to activate the SMART mode.
Temperature of Heated seat and Water are automatically adjusted to user’s original
settings during the seat is occupied and SMART Eco-mode starts again once
unoccupied.
10
Power On/Off
Press the "STOP" button for more than 4 seconds and then the power indication
light goes off. The unit will be power off completely.
Press any button to start the power on.
The unit remembers all of the prior settings in spite of an electrical outage so no
need to reset functions after power is back.
In SMART Eco-Mode, Eco-mode programs analyze user’s time zones of use and control
the temperature of heated seat and water as follows:
- The seat temperature is maintained at 86℉(30℃) in analyzed time zones of use.
- The seat temperature is maintained at 77℉ (25℃) in analyzed time zones of not using.
- Water temperature is maintained at 68℉ (20℃) during the whole cycles of SMART Eco-mode.
Burn protecting system at the low temperature
The seat temperature will automatically lower when set to the highest setting if the
seat is occupied for more than 30 minutes to protect the user against low-grade
burns.
(May cause burns at the low temperature in case sitting on the seat for a long time.)
It returns to the setpoint when resetting or moving away from the seat.
※ Eco-Mode is available when LED indications of SEAT TEMP. and WATER TEMP. on remote control
are ON.
※ To cancel the Eco-mode function, press the ECO MODE until LED indications of AUTO and
SMART both turn off.