(2) Insert fastening bolts through the bolt slots and into the bolt
holes in the toilet.
Rubber grommets
Washers
Fastening nuts
5.5”
(140mm)
Fastening bolts
Catch Plate
Bolt
slots
13
Fastening bolts
Brackets
Catch Plate
(1) Line up the bolt slots in the catch plate with the bolt holes
in the toilet bowl.
4
-A
.
* 5.5”(140mm) hole spacing is required
for a typical installation.
* If your bolt hole spacing is different,
a custom solution is needed to affix
catch plate bracket to the toilet.
Contact us for additional details.
< Install Mounting Plate for Standard Installation >
Fasten the catch plate with fastening bolts after setting in place
the brackets on the catch plate.
4
-B
.
* This method will use a combination
of the included Brackets and the original
toilet seat fastening bolts.
< Install Mounting Plate for top-mounted toilet seats >
< 4-A. (1) >
< 4-A. (2) >
< 4-B. >
Summary of Contents for NB-1360E
Page 23: ......