28
HDE-1C-QAM
Instruction Manual
Event Log Destination:
see of Section 5.9 for details.
Log Destination Port #:
see of Section 5.9 for details.
Clear Log:
allows to clear the records generated during unit’s boot-up process and operation afterward. The records
are retained if the unit loses power.
Lines to Display:
allows the user to select the number of lines to be displayed. The unit supports up to 400 Mb of data
or approximately 65,000 lines. The range is 1 to 65,535.
Save Number of Displayed Lines:
allows the user to save the error log on the screen. Please note that the error log
would be saved only on the screen and not on any database.
5.13 "Event Log" Screen
The “Event Log” screen (Figure 5.11) is a “read/limited write" screen which documents and displays all unit activity. The
data in Event Log can be forwarded to a SysLog database – (see , , & of Section 5.9 for details). The lines are
color coded as follows:
Red font
= error message
Blue font
= informational message
Green font
= confirmation or feedback message
1
2
3
4
5
21
22
23
Figure 5.11 - "Event Log" Screen
1
3
5
2
4
18
19
