manualshive.com logo in svg

Blonder tongue HDE-1C-QAM, User Manual

Share
Download
Blonder tongue HDE-1C-QAM User Manual Download Page 10

10 HDE-1C-QAM 

Instruction Manual

Section 3 – Installation & Power-up

3.1 Unpacking

You will find the following items in the box:

•  HDE-1C-QAM Encoder (QTY=1)
•  Switching Mode Power Supply, 12 VDC, 3.0A (Item: 515132200)
•  A hardware bag (item 741021800) containing the following:

Seven-foot cross-pinned (cross-over) RJ45 Ethernet cable (QTY=1) 

3.2 Installation

The HDE-1C-QAM encoder is designed to be installed in the HDE-3MCH Series rack chassis. The chassis can support 3 
HDE-1C-QAM modules.

You can mount the chassis in a standard EIA, 24 inch (610 mm) deep, enclosed rack. Secure the rack chassis front panel to 
the rack by inserting four machine screws, with cup washers, through the four mounting holes in the front panel.

When installing one or more chassis in a headend rack, it is recommended to leave a 1 rack unit space (1.75” high)
between units to maximize air flow, but it is not required.

3.3 Power-up

To power up the unit, connect the line cord to a 115/230 VAC outlet. 
The “POWER” LED on the front-panel will light green.

FOR SAFE AND RELIABLE OPERATION, THE GROUND PIN OF THE POWER CORD PLUG 

MUST BE GROUNDED PROPERLY.

Summary of Contents for HDE-1C-QAM

































Reviews:

No comments

Brands by name

Popular brands

Load more brands