10
BT-HE-DASHBOARD
User Manual
Unit:
Name of unit as entered on the Settings page.
Clicking on “Unit” will take the browser to the Login page of the
particular encoder/transcoder.
Placing the cursor over “Unit”’s name will display a pop up with
key encoder information as shown in Figure 4.1b.
Firmware Version:
Displays the current firmware version loaded
in the 8C encoders/AQT8.
Input #:
Indicates status of each encoder input. Green indicates
an active input, gray indicates no input.
QAM Virtual Channel#:
Displays the virtual channel assigned to each input program.
RF Channel #:
Displays the assigned RF channels for each encoder.
Units that were previously detected by the DASHBOARD but are no longer connected will be highlighted in red, as
shown below.
Section 4 - Configuring the Unit
4.1 “Status” Screen
The “Status” (Figures 4.1a, 4.1b and 4.1c) displays information for each unit the controller detects (up to 20). Information is
as follows:
Figure 4.1a - “Status” Tab
1
2
3
4
5
Figure 4.1b - “Status” Screen -
Key Unit Info
Figure 4.1c - “Status” Screen - Disconnected Units
1
2
3
4
5
