10 AQD-RCS
Instruction Manual
The "Reading Data from AQD PCM’s" message will be displayed during the communication process. After a status response is
received the Headend Status screen will be displayed. This is a real time data communication process in which the AQD-RCS
is reading the data from each AQD module and may take a few moments to complete, please be patient.
Click the Setup button to proceed to the Setup Page - this permits the entry of the AQD-PCM unit digital addresses into the
AQD-RCS.
AQD-RCS Firmware Version,
MAC Address & Serial Number
(shown for reference only)
The AQD-RCS Setup Page is used to enter headend site information as well as the digital address of each respective PCM
unit connected and deployed in the headend. The digital address of the PCM unit must be entered in order for the Remote
Configuration Server to communicate correctly in real time.
Click to refresh
& update page
Click for Headend
Status page
Click for Unit
Info page
AQD-RCS Setup Page
Click to Save
Setup Changes
Enter the desired headend
Location and Name
Enter the Date & Time for
the real time clock
Click to Delete a PCM unit
Click to verify PCM unit
address & connection
Enter the desired information in the upper portion of the Setup Page and Click the Save button to apply the information to
non-volatile memory.
Use the lower portion (PCM Setup) to enter, remove and verify AQD-PCM units. The digital address of an AQD-PCM must be
first entered into the AQD Remote Configuration Server before it can communicate.
Click to Add a PCM unit