25
EQAM-420A
Instruction Manual
10/100 MAC Address: indicates the MAC Address of the “10/100 Control” Port.
1 GIGE MAC Address: indicates the MAC Address of the “1 gigE/DATA” Port.
Software Version: indicates the software version of the unit.
FPGA1 Version: indicates the current hardware version of the unit’s FPgA1 chipset.
FPGA2 Version: indicates the current hardware version of the unit’s FPgA2 chipset.
FPGA3 & FPGA4 Version: indicates the current hardware version of the unit’s FPgA3 &4 chipsets.
DDQ Version (RF Output 1): indicates the current software version of the unit’s Quad-QAM output module #1.
DDQ Version (RF Output 2): indicates the current software version of the unit’s Quad-QAM output module #2.
EQAM-420A Serial Number: indicates the unit’s serial number.
headend Name: allows user to enter a headend name to make identification easier.
Location: allows user to enter a location name to make identification easier.
Login Timeout (Minutes): indicates the period of time before the unit logs itself out if there is no activity on the web
screens. Range is 5, 15, 30, or 60 minutes.
10/100 IP Address: see of Section 6.7.1 for details.
10/100 Subnet Mask: see of Section 6.7.1 for details.
10/100 Default Gateway: see of Section 6.7.1 for details.
1 GIGE IP Address: see of Section 6.7.1 for details.
Error Log Destination: see of Section 6.7.1 for details.
Log Destination Port: see of Section 6.7.1 for details.
SNMP Destination Port: see of Section 6.7.1 for details.
8
9
10
11
12
13
14
15
16
17
18
19
14
15
16
17
18
19
23
Remember to click on the SAVE button to apply the new values/configurations.
1
2
3
4
5
6
7
Summary of Contents for 6522-PIL
Page 37: ...THIS PAGE INTENTIONALLY LEFT BLANK ...
Page 39: ......
