background image

24 /  EN

Washing Machine /User’s Manual

Operating the product

washes laundry with a very gentle washing action 

to not to damage clothes.

• Fast Full Load

Use this programme to wash your lightly soiled 

cotton clothes in a short time.

• Mini 14'

Use this programme to wash your little amount of 

lightly soiled cotton clothes in a short time.

• Active 40

Use this programme to wash your laundry for 

which you cannot use Cottons 60 °C programme. 

It gives the same result with the Cottons 60 °C 

programme by washing for a longer time at 40 

°C, thus enabling energy saving. 

• Dark Wash

Use this programme to wash your dark coloured 

laundry, or the coloured laundry that you do not 

want them get faded. Washing is performed with 

less mechanical movements at low temperature. 

It is recommended to use liquid detergent or wool 

shampoo for dark coloured laundry.

• Shirts

Use this programme to wash the shirts made of 

cotton, synthetic and synthetic blended fabrics 

together.

• Viscose

You can use this program to wash your laundry 

that bear “viscous and viscous blends” labels or 

which are advised to be washed with delicate 

programs. It cleans your laundry without causing 

any deformation to them. E.g.: Blouses, dresses, 

skirts and etc.

• Bedding

Use this programme to wash your fiber duvets 

that bear "machine washable" tag. Make sure that 

you have loaded the duvet correctly in order not 

to damage the machine and the duvet. Remove 

the duvet cover before loading the duvet into the 

machine. Fold the duvet into two and load it into 

the machine. Load the duvet into the machine 

paying attention to place it in a way that it will not 

contact the bellow.

C

Do not load more than 1 double fibre duvet (200 

x 200 cm).
Do not wash your duvets, pillows and etc. that 

contain cotton in the machine.

A

wARNiNg: 

Do not wash the items apart 

from duvets such as carpets, rugs and etc. in 

the machine. Permanent damage occurs in the 

machine.

5.7 Special programmes

For specific applications, select any of the 

following programmes.

• Rinse

Use this programme when you want to rinse or 

starch separately.

• Spin+Pump

Use this programme to apply an additional spin 

cycle for your laundry or to drain the water in the 

machine.

Before selecting this programme, select the 

desired spin speed and press Start / Pause / 

Cancel button. The machine will spin the laundry 

with the set spin speed and drain the water 

coming out of them.

If you wish to drain only the water without 

spinning your laundry, select the Pump+Spin 

programme and then select the No Spin function 

with the help of Spin Speed Adjustment button. 

Press Start / Pause / Cancel button.

C

Use a lower spin speed for delicate laundries.

5.8 Temperature selection

Whenever a new programme is selected, 

the maximum temperature for the selected 

programme appears on the temperature indicator.

To decrease the temperature, press the 

Temperature Adjustment button. Temperature 

decreases with increments of 10° and finally, “-” 

symbol indicating the cold wash option appears 

on the display.

Summary of Contents for WNF 9448 AE20









































Reviews: