background image

26    

EN

When the electricity is off in door locked 

position, door will keep the locked 

position for two minutes. After two 

minutes, door is allowed to open.

In case the door is not locked,  “door” 

expression will appeare on the screen. 

In that case, door should be opened 

and closed again firmly.

Child-proof lock

Protect the appliance from being 

tampered by children by means of the 

child-proof lock. In this case, no change 

can be made in the running program.

C

 Your washer can be turned on and 

off with On/Off button while the child-

proof lock is activated. In this case, 

your washer will resume its program 

with child-proof lock activated.

The washer is switched to child-lock 

by pressing the 2nd and 4th auxiliary 

functions for 3 sec. “C:on” (Child-proof 

lock is activated) label appears on the 

display.

The same symbol will also be displayed 

whenever any button is pressed while 

the washer is child-locked.

To deactivate the child-proof lock, 

press the 2nd and 4th auxiliary function 

buttons for 3 sec.

“C:OFF” (Child-proof lock is deactivated) 

label appears on the screen.

Ending the program through 

canceling

“Start/Pause/Cancel” button is 

pressed for 3 seconds to cancel the 

program. Start symbol  will flash during 

cancellation. After cancellation, the 

symbol of the corresponding step at 

which the cancellation was made will 

remain lit and “

End

” will appear on the 

screen.

End of program

When the program is finished, the 

symbols of the relevant steps will remain 

lit up and the auxiliary function, spin and 

temperature data selected at the start-

up of the program will remain selected. 

“End” will appear on the display.

Summary of Contents for WM 77110 NBL00













































Reviews: