23
EN
Selectable options of a wash cycle are
extra rinse “R”, super wash “SW”, soak
"S" and anti crease “A”.
1. Even if there is no hot water
system, hot water inlet must still be
connected to another cold water
faucet. Otherwise a fault will occur on
water intake.
2. Programs are limited with the
maximum spin speed appropriate for
that particular type of load.
3. Maximum load capacities are
suggested for various load types.
Wash cycles of full load (Regular/
Cotton, permanent press) should be
half loaded for better wash results
if the laundry is heavily soiled. Half
loading would also minimize wrinkling
of the load.
4. Bleach may only be used in Regular/
Cotton and Permanent Press cycles.
Don’t use bleach with delicates,
handwashables, wools, jeans and
sports, this will lead to clothes
damage.
C
The auxiliary functions in the table
vary according to the model of your
washer.
C
Water and power consumption and
program duration differ from the
table subject to changes in water
pressure, water hardness and
temperature, ambient temperature,
type and amount of laundry, selection
of auxiliary functions, and changes in
supply voltage.
C
Program duration will be displayed on
the screen of your washer according
to your selection.
Auxiliary functions
Auxiliary Function Selection Buttons
a
b
c
d
• Depending on the program, you can
select the desired auxiliary function by
pressing the buttons a, b, c, d.
• Select the required auxiliary functions
before starting the program.
• Symbol of the selected auxiliary
function will light up.
Auxiliary function selection
Auxiliary function that is not compatible
with the program cannot be selected.
(see, “Program Cycle Selection Table”)
• Super Wash
This function (a) increases washing
times for heavily soiled items for better
wash results. Washer will only take in
cold water when this function is chosen.
This function also increases the amount
of rinse water for “Regular/Cotton”
cycle.
• Soak
This function (b) is used for heavily soiled
items when you want to pre-treat them
before washing. Laundry is soaked in
a relatively high amount of warm water
for an hour and a half approximately.
You can use full load and HE “High
efficiency” detergent for soaking. Use
1/3-1/2 of the recommended detergent
dosage for the load amount to be
soaked.
• Extra Rinse
When this function (c) is selected, you
can increase the number of current
rinsing steps. Thus, sensitive skins’
risk of being affected by the remaining
Summary of Contents for WM 77110 NBL00
Page 44: ......
