25
EN
Starting the Program
1. Press Start/Pause/Cancel button to
start the program.
2. The start symbol which indicates that
the program has started will light up.
3. The door locks and the door locked
symbol will light up.
4. The Symbol of the relevant step
(prewash, main wash, rinse, softener
and spin) that the program has
started from will light up.
Progress of program
The progress of a running cycle is
shown through a number of symbols on
the screen.
•
At the beginning of each program
step, the relevant symbol in the series
of symbols will light up and thus, at
the end of the program, all symbols
will remain lit up. The symbol that
lights up at the far right of the series
of symbols indicates the step that is
being carried out.
Soak
When “Soak” auxiliary function is
selected, soak symbol will light up to
indicate the beginning of this wash step.
Main wash
Main wash symbol will light up to
indicate that the main wash cycle has
started.
Rinse
Rinse symbol lights up at the beginning
of the rinse step.
Softener
Softener symbol lights up at the
beginning of softener step.
Spin
Spin symbol will light up at the beginning
of the final spin, during “Drain&Spin”
special programs.
•
If the washer is not spinning, the
program may be in rinse hold mode
or the automatic spin correction
system has been activated due to an
excessive unbalanced distribution of
laundry in the washer.
Changing the selections after
the program has started
The selected spin speed and program
temperature fade out. An empty frame
appears.
When the “Program selection” button is
brought to the appropriate position, rpm
and temperature data reappear.
Switching the washer to
standby mode
The washer is switched to standby
mode by pressing “Start/Pause/Cancel”
button momentarily. The Standby
symbol which indicates the washer is
in standby mode lights up and the start
symbol that shows the program has
started and is still continuing fades out.
Selecting or canceling an auxiliary
function in pause mode
Auxiliary functions can be cancelled or
selected in accordance with the step the
program is at.
Adding/removing laundry in pause
mode
The door can be opened if the water
level is suitable. The door locked symbol
will light up until the door is suitable for
opening. This symbol will fade out as
soon as the door is allowed to open.
Laundry may be added / taken out by
opening the door.
Door lock
The Door Locked Symbol lights up
when the loading door is locked. This
symbol will flash until the door is allowed
to open. Do not force the door at this
stage. This symbol will fade out as soon
as the door is allowed to open. You may
open the door after the symbol fades
out.
Summary of Contents for WM 77110 NBL00
Page 44: ......
