background image

22

Load capacity

12

Permissible water pressure 0,3 –10 bar (= 3 – 100 N/cm²

= 0,01-1,0Mpa)

Electrical connection

230 Volt, 10 Amps

(see type plate)

Total power

2000 W

Heater power

1800 W

Because we continually strive to improve our products,

we may change our specifications and designs without

prior notice.

This device corresponds to the following EU

Directives:

73/23/EC 

Low Voltage Directive

89/336/EC 

EMV directive

93/68/EC 

CE identification directive

DIN EN 50242 

Electric dishwasher for 

domestic use Testing method

for utilization properties

Safety notes for installation

Prior to installing and using your machine, please check

it for possible transport damage.

If the machine is damaged, please contact your supplier.

Never install and use damaged machines.

The following directions must be observed in order to

connect the dishwasher properly.

Make sure that the data on the type plate correspond

to the current and voltage of your power supply

connections before putting the machine into operation.

The connection of the machine may only be made

using a properly grounded socket. Ensure that the

grounding is in accordance with regulations.

The grounded socket must be easily accessible and

close to the machine.

Do not use extension cables or multiple adapters.

There is a possibility of fire hazard through overheating.

Hardwiring may only be carried out by a qualified

electrician.

Check the power cable, the water inlet hose and the

drainage hose. Damaged parts may only be exchanged

by customer service personnel or by a qualified

electrical service expert.

5

8

 Door handle

9

 On/Off button

6

 Start / Pause button

7

 Economy button (depending on the model)

7

1

2

3

4

9

7

6

5
8

10

11

12

9

 

Detergent dispenser

10

 

Filters

11

 

Door

12

 

Control panel

13

 

Turbo fan heat drying system (depending on the model)

1

 

Housing

2

 

Upper basket with rack

3

 

Guiding track for the upper basket

4

 

Upper spray arm

5

 

Lower basket

6

 

Salt container

7

 

Cutlery basket

8

 

Lower spray arm

5

7

6

3

2

4

8

9

1

1

 Programme lights

2

 Rinse aid level indicator light

3

 Salt level indicator light

4

 LED progress indicator lights

5

 Programme selection button

13

Technical features

9

Directions for assembly

10

Control panel

3

Get to know your machine

View of the machine

Summary of Contents for GSN 1220















Reviews: