Blomberg GSN 1220 Operation Instruction Manual Download Page 5

4

The connection of the machine to the mains may not

be made by using an extension cable. Extension

cables do not provide the necessary safety (e.g. danger

of overheating).
Always use the original plug delivered with the machine.
The plug must be freely accessible after the machine

has been installed.

Children’s safety

Do not allow children to play with the machine.

Dishwasher detergents may have caustic effects in

the areas of the eyes, mouth and throat.  Please note

the safety notes provided by the manufacturers of the

detergents.

Never leave children unsupervised while the machine

is open. Leftovers of the detergents may still be

contained in the machine.

The water in the dishwasher is not drinking water.

Danger of caustic injuries.

Always place long and sharp/pointed objects (e.g.

serving fork, bread knife) into the cutlery basket with

the pointed end down or flat on the upper basket to

avoid possible injuries.

For daily operation

Use your machine only in the household, for the

following uses: Washing household dishes.

Do not use chemical solvents in the machine; there

is a danger of explosion.

Do not sit or stand on the opened door or place other

things on it. The machine may tip over.

Do not open the door while the machine is in operation.

Hot water or steam may escape.

Do not leave the door open – an open door can be

a hazard.

In the case of problems

Repairs and changes to the machine may only be

carried out by qualified customer service personnel.

In the event of problems or repairs, disconnect the

machine from the mains supply:

- disconnect the machine by pulling the mains plug

- shut off the fuse.

Do not pull on the cable – pull on the plug. Turn off

the water supply tap.

23

Installing your dishwasher

Choose a suitable location for your dishwasher. Take

care to ensure that the machine is standing safely and

levelly.

Unevenness in the floor can be equalised by adjusting

the screw feet. When the machine is standing correctly,

the door can be closed without difficulties.

Water inlet and drainage hoses must be placed so

that they can move freely in order to avoid bending or

squeezing them.

The machine may not be hooked up in rooms with a

temperature below 0° Celsius.

Water connection

The dishwasher may be connected to cold and warm

water to a max. temperature of 60° Celsius.

The dishwasher may not be connected to open warm

water devices and flow-through water heaters.

Connect water inlet hose

Take care to ensure that the water inlet hose is not bent

or squeezed. Do not install a used hose set.

Use a screw-on hose connector to connect the water

inlet hose to a water tap with an external thread with a

measurement of 3/4 inches.

If required, use a filter inset to filter deposits from the

pipes.

Check that the connection does not leak.

Attention

For safety reasons, close the tap after every rinse

process.

Lowest permissible water

pressure:

0,3 bar = 3 N/cm² = 30 kPa

When the water pressure is

below 1 bar, please contact your

technician.

Permissible water pressure:

When the water pressure is above

10 bar, a pressure reduction valve

must be installed (available in trade

supply stores).

Highest permissible water

pressure:

10 bar = 100N/cm² = 1MPa

3/4”

min 10

3/4”

3/4” 1/2”

CH
DK

S

N

SF

Summary of Contents for GSN 1220















Reviews: