11
16
The cleaning results are unsatisfactory
Possible causes
- Improper loading
- Wrong programme selection
- Spray arms are not turning
- Clogged filters
- Filters are not placed in their proper
positions
- Spray arm nozzles are clogged
- Overloaded baskets
- Detergent is moist or clumping
- Too little detergent
- Too little rinse aid
- The lid of the detergent dispenser
remained open.
- Using cutlery with a low surface
quality
The dishes are not becoming clean
How to fix these problems
- Load the dishwasher as suggested in the directions.
- Select a programme which washes at a higher temperature
or takes longer.
- Check if the spray arms move freely.
- Clean all strainers and filters as described in the manual
- Check if all strainers and filters are placed in their proper
positions
- Clean the spray arms as described in the manual
- Do not overlaod the baskets
- Store detergents in a dry location. Close the lid of the
container carefully
- Increase the amount of the detergent as per the programme
table.
- Increase the amount of rinse aid / refill the rinse aid dispenser.
- Always ensure that you close the detergent dispenser lid
after pouring in the detergent.
- Cutlery of this type is not suited to dishwashers.
Lower basket
Suggestions for loading the dishwasher
Use the lower basket for plates, bowls, pots etc.
4 folding plate support rods
(depending on the model)
There are four separate "folding plate support rods"
in the lower basket of your dishwasher designed to
allow you more space to accommodate saucepans
and large bowls in the lower basket. You can either
fold each section (1,2,3,4) individually or, all at once,
to create a large empty space.
Simply press the handgrips ( ) and fold them down"
Variable cutlery basket (depending on the model)
The variable cutlery basket can be separated into 3 parts depending on the amount of
cutlery and the degree of dirtiness.
Small cutlery basket sections also fit into the upper basket.
To do this, turn the lock on the handle to the right ( ).
Pull the smaller cutlery basket upwards and out of its holders ( )
To put the parts together again, proceed in the opposite direction.
Use the basket inset ( ) for your cutlery so that all items in the basket are surrounded
by a sufficient water flow.
For larger items (e.g. wire whisks), the basket inset may be removed ( ).
To make loading easier, the cutlery basket can be removed.
Place long items such as ladles, cooking spoons etc. on the rack in the upper basket.
A
C
C
A
B
A
B
C
1
2
3
4
A
